Oracle Cloud Infrastructure Documentation

FastConnect: With a Third-Party Provider

This topic is for customers who want to use Oracle Cloud Infrastructure FastConnect by connecting to a third-party network provider of their choice, and not an Oracle provider. For a summary of the different ways to connect, see the connectivity models.

If you are using an Oracle provider, see FastConnect: With an Oracle Provider. Or, if you want to use FastConnect by colocating with Oracle, see FastConnect: Colocation with Oracle.

For general information about FastConnect, see FastConnect.


Avoid entering confidential information when assigning descriptions, tags, or friendly names to your cloud resources through the Oracle Cloud Infrastructure Console, API, or CLI.

Important Points and Responsibilities

  • You can use FastConnect by working with a third-party network service provider or carrier of your choice. The network provider must be capable of connecting to the Oracle routers in one of the FastConnect data center locations over single-mode fiber. For more detailed technical requirements, see Hardware and Routing Requirements.
  • Your overall connection with the third-party provider includes two parts, as illustrated in the following diagram:

    • Part 1: Your physical connection to the third-party provider. The rest of this topic assumes you've already set up this part of the overall connection.
    • Part 2: The physical cross-connect that the third-party provider sets up in the FastConnect location data center on your behalf.

      This image shows the two parts of the overall connection with a third-party provider.

  • To obtain the Letter of Authorization (LOA) for the cross-connect, you must use the Oracle Console to set up a cross-connect or cross-connect group. The resulting LOA from Oracle covers part 2 of the connection in the preceding diagram.
  • You must forward the LOA to your third-party provider, who is responsible for working with the data center to set up the physical cross-connect on your behalf.
  • The third-party provider issues a cross-connect order with the data center facility to run fiber optics to complete the connection from the third-party provider's cage to Oracle's patch panel as described in the LOA. Typically the data center colocation staff are the ones who run the fiber optics to complete the connection.
  • Each LOA is valid for only a limited time. If the physical cross-connect is not set up before the LOA's expiration, the LOA is revoked.
  • The third-party provider is responsible for charging you for the entire connection (both parts 1 and 2). Oracle does not set up this cross-connect in the data center, does not pay for it, and does not include it in your FastConnect charges.
  • The LOA specifies an Oracle demarcation point. If your network provider is located at a different demarcation point in the data center cage, they must set up the cross-connect from their demarcation point to the Oracle demarcation point.

Getting Started with FastConnect

The following flow chart shows the overall process of setting up FastConnect.

This flow chart shows the steps for getting started with FastConnect

Task 1: Learn and plan
Task 2: Set up a DRG (private peering only)
Task 3: Set up your cross-connect group and cross-connect(s)
Task 4: Forward the LOA to your third-party provider
Task 5: Check light levels
Task 6: Confirm your interfaces are up
Task 7: Activate the cross-connect(s)
Task 8: Set up your virtual circuit(s)
Task 9: Configure your edge
Task 10: Ping the Oracle BGP IP address
Task 11: Confirm the BGP session is established
Task 12: Test the connection

Managing Your Connection

To get the status of your connection
To add a new cross-connect to an existing cross-connect group
To edit a virtual circuit
To terminate a connection, or part of it
To manage public IP prefixes for a public virtual circuit