Get the endpoint that is being used to call (ex, https://www.example.com).
Sets the endpoint to call (ex, https://www.example.com).
The endpoint of the service.
Sets the region to call (ex, Region.US_PHOENIX_1). Note, this will call {@link #endpoint(String) endpoint} after resolving the endpoint.
The region of the service.
Sets the regionId to call (ex, 'us-phoenix-1').
Note, this will first try to map the region ID to a known Region and call {@link #region(Region) region}. If no known Region could be determined, it will create an endpoint assuming its in default Realm OC1 and then call {@link #endpoint(String) endpoint}.
The public region ID.
Determines whether realm specific endpoint should be used or not. Set realmSpecificEndpointTemplateEnabled to "true" if the user wants to enable use of realm specific endpoint template, otherwise set it to "false"
flag to enable the use of realm specific endpoint template
Activates the specified connector.
After you send your request, the connector's state is temporarily UPDATING. When the state changes to ACTIVE, data begins transferring from the source service to the target service. For more information, see [Activating a Connector](https://docs.cloud.oracle.com/iaas/Content/connector-hub/activate-service-connector.htm).
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ActivateServiceConnectorResponse
Moves a connector into a different compartment within the same tenancy. For more information, see Moving a Connector.
When provided, If-Match is checked against ETag values of the resource.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ChangeServiceConnectorCompartmentResponse
Close the client once it is no longer needed
Creates a new connector in the specified compartment. A connector is a logically defined flow for moving data from a source service to a destination service in Oracle Cloud Infrastructure. For more information, see Creating a Connector. For general information about connectors, see Overview of Connector Hub.
For purposes of access control, you must provide the [OCID](https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm) of the compartment where you want the connector to reside. Notice that the connector doesn't have to be in the same compartment as the source or target services. For information about access control and compartments, see [Overview of the IAM Service](https://docs.cloud.oracle.com/iaas/Content/Identity/Concepts/overview.htm).
After you send your request, the new connector's state is temporarily CREATING. When the state changes to ACTIVE, data begins transferring from the source service to the target service. For instructions on deactivating and activating connectors, see [Activating a Connector](https://docs.cloud.oracle.com/iaas/Content/connector-hub/activate-service-connector.htm).
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
CreateServiceConnectorResponse
Creates a new ServiceConnectorWaiter for resources for this service.
The waiter configuration for termination and delay strategy
The service waiters.
Deactivates the specified connector.
After you send your request, the connector's state is temporarily UPDATING and any data transfer stops. The state then changes to INACTIVE. For more information, see [Deactivating a Connector](https://docs.cloud.oracle.com/iaas/Content/connector-hub/deactivate-service-connector.htm).
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeactivateServiceConnectorResponse
Deletes the specified connector. For more information, see Deleting a Connector.
After you send your request, the connector's state is temporarily DELETING and any data transfer stops. The state then changes to DELETED.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
DeleteServiceConnectorResponse
Gets the specified connector's configuration information. For more information, see Getting a Connector.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetServiceConnectorResponse
Gets the waiters available for resources for this service.
The service waiters.
Gets the details of the specified work request. For more information, see Getting a Work Request's Details.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
GetWorkRequestResponse
Lists connectors in the specified compartment. For more information, see Listing Connectors.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListServiceConnectorsResponse
Lists work request errors for the specified work request. Results are paginated. For more information, see Listing Work Request Errors.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListWorkRequestErrorsResponse
Lists logs for the specified work request. Results are paginated. For more information, see Listing Work Request Log Entries.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListWorkRequestLogsResponse
Lists the work requests in the specified compartment. For more information, see Listing Work Requests.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
ListWorkRequestsResponse
Shutdown the circuit breaker used by the client when it is no longer needed
Updates the configuration information for the specified connector. For more information, see Updating a Connector.
After you send your request, the connector's state is temporarily UPDATING and any data transfer pauses. The state then changes back to its original value: if ACTIVE, then data transfer resumes.
This operation uses {@link common.OciSdkDefaultRetryConfiguration} by default if no retry configuration is defined by the user.
UpdateServiceConnectorResponse
This service client uses {@link common.CircuitBreaker.DefaultConfiguration} for all the operations by default if no circuit breaker configuration is defined by the user.