create-alarm-suppression-alarm-suppression-alarm-target

Description

Creates a dimension-specific suppression for an alarm.

For important limits information, see Limits on Monitoring.

This call is subject to a Monitoring limit that applies to the total number of requests across all alarm operations. Monitoring might throttle this call to reject an otherwise valid request when the total rate of alarm operations exceeds 10 requests, or transactions, per second (TPS) for a given tenancy.

Usage

oci monitoring alarm-suppression create-alarm-suppression-alarm-suppression-alarm-target [OPTIONS]

Required Parameters

--alarm-suppression-target-alarm-id [text]

The OCID of the alarm that is the target of the alarm suppression.

--dimensions [complex type]

A filter to suppress only alarm state entries that include the set of specified dimension key-value pairs. If you specify {“availabilityDomain”: “phx-ad-1”} and the alarm state entry corresponds to the set {“availabilityDomain”: “phx-ad-1” and “resourceId”: “ocid1.instance.region1.phx.exampleuniqueID”}, then this alarm will be included for suppression.

The value cannot be an empty object. Only a single value is allowed per key. No grouping of multiple values is allowed under the same key. Maximum characters (after serialization): 4000. This maximum satisfies typical use cases. The response for an exceeded maximum is HTTP 400 with an “dimensions values are too long” message. This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

--display-name [text]

A user-friendly name for the alarm suppression. It does not have to be unique, and it’s changeable. Avoid entering confidential information.

--time-suppress-from [datetime]

The start date and time for the suppression to take place, inclusive. Format defined by RFC3339.

Example: 2023-02-01T01:02:29.600Z

The following datetime formats are supported:

UTC with microseconds

Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD
Example: 2017-09-15T20:30:00.123456Z

UTC with milliseconds
***********************
.. code::

    Format: YYYY-MM-DDTHH:mm:ss.sssTZD
    Example: 2017-09-15T20:30:00.123Z

UTC without milliseconds
**************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T20:30:00Z

UTC with minute precision
**************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T20:30Z

Timezone with microseconds

Format: YYYY-MM-DDTHH:mm:ssTZD
Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800

Timezone with milliseconds
***************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800

Timezone without milliseconds
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800

Timezone with minute precision
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800

Short date and time
********************
The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes)

.. code::

    Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm"
    Example: '2017-09-15 17:25'

Date Only
**********
This date will be taken as midnight UTC of that day

.. code::

    Format: YYYY-MM-DD
    Example: 2017-09-15

Epoch seconds
**************
.. code::

    Example: 1412195400

--time-suppress-until [datetime]

The end date and time for the suppression to take place, inclusive. Format defined by RFC3339.

Example: 2023-02-01T02:02:29.600Z

The following datetime formats are supported:

UTC with microseconds

Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD
Example: 2017-09-15T20:30:00.123456Z

UTC with milliseconds
***********************
.. code::

    Format: YYYY-MM-DDTHH:mm:ss.sssTZD
    Example: 2017-09-15T20:30:00.123Z

UTC without milliseconds
**************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T20:30:00Z

UTC with minute precision
**************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T20:30Z

Timezone with microseconds

Format: YYYY-MM-DDTHH:mm:ssTZD
Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800

Timezone with milliseconds
***************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800

Timezone without milliseconds
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800

Timezone with minute precision
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800

Short date and time
********************
The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes)

.. code::

    Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm"
    Example: '2017-09-15 17:25'

Date Only
**********
This date will be taken as midnight UTC of that day

.. code::

    Format: YYYY-MM-DD
    Example: 2017-09-15

Epoch seconds
**************
.. code::

    Example: 1412195400

Optional Parameters

--defined-tags [complex type]

Usage of predefined tag keys. These predefined keys are scoped to namespaces. Example: {“Operations”: {“CostCenter”: “42”}} This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

--description [text]

Human-readable reason for this alarm suppression. It does not have to be unique, and it’s changeable. Avoid entering confidential information.

Oracle recommends including tracking information for the event or associated work, such as a ticket number.

Example:

Planned outage due to change IT-1234.

--freeform-tags [complex type]

Simple key-value pair that is applied without any predefined name, type or scope. Exists for cross-compatibility only. Example: {“Department”: “Finance”} This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

--from-json [text]

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

--max-wait-seconds [integer]

The maximum time to wait for the resource to reach the lifecycle state defined by --wait-for-state. Defaults to 1200 seconds.

--wait-for-state [text]

This operation creates, modifies or deletes a resource that has a defined lifecycle state. Specify this option to perform the action and then wait until the resource reaches a given lifecycle state. Multiple states can be specified, returning on the first state. For example, --wait-for-state SUCCEEDED --wait-for-state FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned.

Accepted values are:

ACTIVE, DELETED

--wait-interval-seconds [integer]

Check every --wait-interval-seconds to see whether the resource has reached the lifecycle state defined by --wait-for-state. Defaults to 30 seconds.

Global Parameters

Use oci --help for help on global parameters.

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --connection-timeout, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --proxy, --query, --raw-output, --read-timeout, --realm-specific-endpoint, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Example using required parameter

Copy and paste the following example into a JSON file, replacing the example parameters with your own.

    oci monitoring alarm-suppression create-alarm-suppression-alarm-suppression-alarm-target --generate-param-json-input dimensions > dimensions.json

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration and appropriate security policies before trying the examples.

    export alarm_suppression_target_alarm_id=<substitute-value-of-alarm_suppression_target_alarm_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/monitoring/alarm-suppression/create-alarm-suppression-alarm-suppression-alarm-target.html#cmdoption-alarm-suppression-target-alarm-id
    export display_name=<substitute-value-of-display_name> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/monitoring/alarm-suppression/create-alarm-suppression-alarm-suppression-alarm-target.html#cmdoption-display-name
    export time_suppress_from=<substitute-value-of-time_suppress_from> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/monitoring/alarm-suppression/create-alarm-suppression-alarm-suppression-alarm-target.html#cmdoption-time-suppress-from
    export time_suppress_until=<substitute-value-of-time_suppress_until> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/monitoring/alarm-suppression/create-alarm-suppression-alarm-suppression-alarm-target.html#cmdoption-time-suppress-until

    oci monitoring alarm-suppression create-alarm-suppression-alarm-suppression-alarm-target --alarm-suppression-target-alarm-id $alarm_suppression_target_alarm_id --dimensions file://dimensions.json --display-name $display_name --time-suppress-from $time_suppress_from --time-suppress-until $time_suppress_until