Furukawa Electric

Learn how to configure a Furukawa Electric router for Site-to-Site VPN between your on-premises network and cloud network.

This configuration was validated using a Furukawa Electric series FITELnet-F220/F221 running Firmware 01.00(00)[0]00.00.0 [2019/07/05 15:00].

Important

Oracle provides configuration instructions for a tested set of vendors and devices. Use the correct configuration for your vendor and software version.

If the device or software version that Oracle used to verify the configuration does not exactly match your device or software, you might still be able to create the necessary configuration on your device. Consult your vendor's documentation and make any necessary adjustments.

If your device is for a vendor not in the list of verified vendors and devices, or if you're already familiar with configuring your device for IPSec, see the list of supported IPSec parameters and consult your vendor's documentation for assistance.

Important

Oracle uses asymmetric routing across the multiple tunnels that make up the IPSec connection. Even if you configure one tunnel as primary and another as backup, traffic from your VCN to your on-premises network can use any tunnel that is "up" on your device. Configure your firewalls accordingly. Otherwise, ping tests or application traffic across the connection will not reliably work.

Before Starting

Before configuring your CPE, ensure that you:

Configure your internet provider settings.
Configure firewall rules to open UDP port 500, UDP port 4500, and ESP.

Supported Encryption Domain or Proxy ID

The values for the encryption domain (also known as a proxy ID, security parameter index (SPI), or traffic selector) depend on whether your CPE supports route-based tunnels or policy-based tunnels. For more information about the correct encryption domain values to use, see Supported Encryption Domain or Proxy ID.

Parameters from API or Console

Get the following parameters from the Oracle Cloud Infrastructure Console or API.

${vpn-ip#}

Oracle VPN headend IPSec tunnel endpoints. There is one value for each tunnel.
Example values: 129.146.12.52, 129.146.13.52

${sharedSecret#}

The IPSec ISAKMP pre-shared-key. There is one value for each tunnel.
Example value: EXAMPLEDPfAMkD7nTH3SWr6OFabdT6exXn6enSlsKbE

${cpePublicIpAddress}

The public IP address for the CPE (previously made available to Oracle via the Console).

${VcnCidrBlock}

When creating the VCN, your company selected this CIDR to represent the IP aggregate network for all VCN hosts.
Example Value: 10.0.0.0/20

Parameters Based on Current CPE Configuration and State

The following parameters are based on your current CPE configuration.

${tunnelNumber#}

An interface number to identify the specific tunnel. You need one unused unit number per tunnel.
Example value: 1, 2

${isakmpPolicy}

The ISAKMP policy name.
Example value: isakmp-policy

${ipsecPolicy#}

The IPSec policy name.
Example value: ipsec-policy

${isakmpProfile#}

The ISAKMP profile name. You need one unused ISAKMP profile name per tunnel.
Example values: OCI-VPN-profile1, OCI-VPN-profile2

${selector}

The selector name.
Example value: OCI-VPN-selector

${map#}

The map name. You need one unused map name per tunnel.
Example values: OCI-VPN-MAP1, OCI-VPN-MAP2

${customer-bgp-asn}

Your BGP ASN.
Example value: 65000

${oracle-bgp-asn#}

Oracle's BGP ASN.
Example value: 31898

${customer-interface-ip#}

The inside tunnel interface for CPE.
Example value: 10.0.0.16/31

${oracle-interface-ip#}

The inside tunnel interface for ORACLE.
Example value: 10.0.0.17/31

${router-id}

The BGP router ID.
Example value: 10.0.0.16

Config Template Parameter Summary

Each region has multiple Oracle IPSec headends. The following template allows you to set up multiple tunnels on your CPE, each to a corresponding headend. In the following table, "User" is you/your company.


Parameter	Source	Example Value
`${vpn-ip1}`	Console/API	129.146.12.52
`${sharedSecret1}`	Console/API	(long string)
`${vpn-ip2}`	Console/API	129.146.13.52
`${sharedSecret2}`	Console/API	(long string)
`${cpePublicIpAddress}`	User	203.0.113.1
`${VcnCidrBlock}`	User	10.0.0.0/20
`${tunnelNumber1}`	User	1
`${tunnelNumber1}`	User	2
`${isakmpPolicy}`	User	isakmp-policy
`${ipsecPolicy}`	User	ipsec-policy
`${isakmpProfile1}`	User	OCI-VPN-profile1
`${isakmpProfile2}`	User	OCI-VPN-profile2
`${selector}`	User	OCI-VPN-selector
`${map1}`	User	OCI-VPN-MAP1
`${map2}`	User	OCI-VPN-MAP2
`${customer-bgp-asn}`	Console/API/User	65000
`${oracle-bgp-asn1}`	Console/API	31898 *
`${oracle-bgp-asn2}`	Console/API	31898 *
`${customer-interface-ip1}`	Console/API/User	10.0.0.16/31
`${customer-interface-ip2}`	Console/API/User	10.0.0.18/31
`${oracle-interface-ip1}`	Console/API/User	10.0.0.17
`${oracle-interface-ip2}`	Console/API/User	10.0.0.19
`${router-id}`	User	10.0.0.16
* Oracle's BGP ASN for the commercial cloud is 31898, except the Serbia Central (Jovanovac) region which is 14544.

Important

The following ISAKMP and IPSec policy parameter values are applicable to Site-to-Site VPN in the commercial cloud. For the Government Cloud, you must use the values listed in Required Site-to-Site VPN Parameters for Government Cloud.

ISAKMP Policy Options


Parameter	Recommended Value
ISAKMP protocol version	Version 1
Exchange type	Main mode
Authentication method	Pre-shared keys
Encryption	AES-256-cbc
Authentication algorithm	HMAC-SHA1-96
Diffie-Hellman Group	Group 5
IKE session key lifetime	28,800 seconds (8 hours)

IPSec Policy Options


Parameter	Recommended Value
IPSec protocol	ESP, tunnel-mode
Encryption	AES-CBC/256
Authentication algorithm	HMAC-SHA1-96/160
Diffie-Hellman Group	Group 5
Perfect Forward Secrecy	Enabled
IPSec session key lifetime	3600 seconds (1 hour)

CPE Configuration

ISAKMP and IPSec Configuration

crypto ipsec policy ${ipsecPolicy}
 set pfs group5
 set security-association transform-keysize aes 256 256 256
 set security-association transform esp-aes esp-sha-hmac
exit
!
crypto ipsec selector ${selector}
 src 1 ipv4 any
 dst 1 ipv4 any
exit
!
crypto isakmp policy ${isakmpPolicy}
 authentication pre-share
 encryption aes
 encryption-keysize aes 256 256 256
 group 5
 hash sha
exit
!
crypto isakmp profile ${isakmpProfile1}
 local-address ${cpePublicIpAddress}
 set isakmp-policy ${isakmpPolicy}
 set ipsec-policy ${ipsecPolicy}
 set peer ${vpn-ip1}
 ike-version 1
 local-key ascii ${sharedSecret1}
exit
!
crypto isakmp profile ${isakmpProfile2}
 local-address ${cpePublicIpAddress}
 set isakmp-policy ${isakmpPolicy}
set ipsec-policy ${ipsecPolicy}
set peer ${vpn-ip2}
ike-version 1
 local-key ascii ${sharedSecret2}
exit
!
crypto map ${map1} ipsec-isakmp
 match address ${selector}
set isakmp-profile ${isakmpProfile1}
exit
!
crypto map ${map2} ipsec-isakmp
 match address ${selector}
 set isakmp-profile ${isakmpProfile2}
exit
!
interface Tunnel ${tunnelNumber1}
 tunnel mode ipsec map ${map1}
ip address ${customer-interface-ip1}
exit
!
interface Tunnel ${tunnelNumber2}
 tunnel mode ipsec map ${map2}
 ip address ${customer-interface-ip2}
exit

BGP Configuration

ip route ${vcnCidrBlock} Tunnel ${tunnelNumber1}
ip route ${vcnCidrBlock} Tunnel ${tunnelNumber2}

Static Routes Configuration

router bgp ${customer-bgp-asn}
 bgp router-id ${router-id}
 bgp log-neighbor-changes
 neighbor ${oracle-interface-ip1} ebgp-multihop 10
 neighbor ${oracle-interface-ip1} enforce-multihop
 neighbor ${oracle-interface-ip1} remote-as ${oracle-bgp-asn1}
 neighbor ${oracle-interface-ip1} update-source tunnel ${tunnelNumber1}
 neighbor ${oracle-interface-ip2} ebgp-multihop 10
 neighbor ${oracle-interface-ip2} enforce-multihop
 neighbor ${oracle-interface-ip2} remote-as ${oracle-bgp-asn2}
 neighbor ${oracle-interface-ip2} update-source tunnel ${tunnelNumber2}
 !
 address-family ipv4 unicast
  redistribute connected
exit

Oracle Cloud Infrastructure Documentation